HTML)

分享到：

南通航运职业技术学院学报[ISSN:1006-6977/CN:61-1281/TN]

Title:: Research on Marine Propeller Modeling Based on Solid Works and Pro/E

Author(s):: WANG Huan; Dept.of Marine Engineering, Nantong Vocational & Technical Shipping College

摘要:: 文章基于Solid Works、Pro/E两款软件,分别研究了船用螺旋桨建模方法,推导出了螺旋桨叶切面型值点从

局部坐标系到全局坐标系的坐标转换公式,并对该公式进行了优化。实践证明文章提出的螺旋桨三维实体建

模方法是切实可行的,可极大地缩短螺旋桨设计与加工周期。

Abstract:: This article applies Solid Works and Pro/E to the study on the methods of marine propeller

modeling, deduces the formula of coordinate transformation of the propeller blade surface

points from local coordinate system to global coordinate system as well as optimizes the

formula. The practice proves that the 3D solid modeling methods put forward in this article

are feasible, which greatly reduce the design and machining cycle.

[1]盛振邦,刘应中.船舶原理[M].上海:上海交通大学,2013.

[2]彭勤学.基于Solid Works的船用螺旋桨建模[J].武汉交通职业学院学报,2014(2):80-82.

[3]吴利红,董连斌,许文海.基于MATLAB和Pro E的螺旋桨三维建模[J].大连海事大学学报,2011(2):17-20.

[4]汪小翔.推力鳍对吊舱推进器水动力性能的影响[J].船海工程,2015(6):25-30.

[5]王艳龙,陈明.面向CFD的螺旋桨逆向三维曲面建模方法[J].船海工程,2012(4):39-41.

[6]王国强,董世汤.船舶螺旋桨理论与应用[M].哈尔滨:哈尔滨工程大学,2009.

[7] 彭勇.计算机辅助螺旋桨设计[D].武汉:华中科技大学,2007.

更新日期/Last Update: 2019-10-09